MPO Patch Cord / Fan-out Cord
Patch Cord
(Ruggedized)
Patch Cord(Bare-ribbon)
(Bare-ribbon)
Fan-out Cord
Features & Benefits
- Push-on / Pull-off latching connector
- Easy connection and disconnection
- No need for matching material : Fiber protrusion
- Low Insertion loss & Reflection
- Simple & Low cost
- IEC61754-7, TIA FOCIS5/605-4
Applications
- Patch cord : Bare fiber ribbon type and Ruggedized type
- Fan-out cord with single fiber connectors
- MPO connector kit
- Adapter
- Assembly tool for MPO kit
Adapter
Ordering Information
- MPO patch cord, pigtail : MPO[1][2][3]-[4]-[5/6]-[7]M
- MPO Fan-out Cord : MPO[1][2][3]/[8][9]-[5/6]-[7]M
| [1] | Fiber Number | 4 | 4-fiber |
| 8 | 8-fiber | ||
| 12 | 12-fiber | ||
| [2] | Guide-pin | T | with Guide pins |
| U | without Guide pin | ||
| [3] | Polishing Type for MPO Connector |
PC | PC polishing |
| APC | Angled PC polishing | ||
| [4] | Connector Number | 1 | Connectorized on one end |
| 2 | Connectorized on both ends | ||
| [5] | Connector Type | S | Single-mode fiber |
| LL | Low Loss type | ||
| G | Multi-mode fiber (50/125) | ||
| G62 | Multi-mode fiber (62.5/125) | ||
| [6] | Cable Type | T | Bare-ribbon (non-Ruggedized) |
| TCF | Jacketed ribbon (Ruggedized) | ||
| [7] | Cable Length (meter) | ||
| [8] | Connector Type for Single Connector *1 |
FC | FC connector |
| SC | SC connector | ||
| ST | ST connector | ||
| LC | LC connector | ||
| MU | MU connector | ||
| [9] | Polishing Type for Single Connector |
PC | PC polishing |
| APC *2 | Angled PC polishing | ||
*1 Other connectors are available upon customers' requests
*2 APC is for Single-mode FC and SC connectors
